adian Draper Battery Chargers and Draper Starters
Draper Tools
Draper Tools
 

Battery Chargers & Starters


Tools Shop >  Battery Chargers & Starters


Draper Battery Chargers & Starters



Draper 12V Battery Charger

(Tool Reference: 82698

Draper 12V Battery Charger
12V Battery Charger
Features short circuit protection, thermal overload protection and fitted with 'fully charged' indication LED. Suitable for lead acid wet cell batteries only, between 40Ah and 160Ah. Supplied with insulated leads and battery clips. Display carton. Specification:
Charging output   ...   12V
Input-single phase      ...   230V AC
Weight   ...   1.4kg
Draper Reference: 82698

22.50 27.00

Product: Draper 12V Battery Charger
Tool Reference: 82698
Bigger picture

Quantity:  






Expert 12V 135A Battery Starter/Charger

(Tool Reference: 05582

Expert 12V 135A Battery Starter/Charger
Expert 12V 135A Battery Starter/Charger
Expert Quality, for garage and workshop use. The starter/charger has thermal overload protection, polarity inversion and a carrying handle. Carton packed. Specification:
Charging output   ...   12V
Input: single phase   ...   230V - 16A
Charging current effective   ...   18A (RMS)
Charging current (average)   ...   12A (EN60335)
Cranking current effective   ...   135A (RMS)
Cranking current (average)   ...   100A (EN60335)
Rechargeable battery cap. range   ...   20A - 200Ah
Fuse   ...   50A x 1
Dimensions   ...   200 x 190 x 270mm
Weight   ...   6kg
Draper Reference: 05582

201.50 241.80

Product: Expert 12V 135A Battery Starter/Charger
Tool Reference: 05582
Bigger picture

Quantity:  






Expert 12V/24V 20A Battery Charger

(Tool Reference: 05583

Expert 12V/24V 20A Battery Charger
Expert 12V/24V 20A Battery Charger
Expert Quality, for garage and workshop use. The charger has thermal overload protection, an easy-to-read ammeter, polarity inversion and a carrying handle. Carton packed. Specification:
Charging output   ...   12/24V
Input-single phase   ...   230V AC - 13A
Charging steps   ...   2
Fast charge steps   ...   1
Charging current effective   ...   30A (RMS)
Charging current (average)   ...   20A (EN60335)
Fuse   ...   40A x 1
Dimensions   ...   200 x 190 x 270mm
Weight   ...   7.4kg
Draper Reference: 05583

217.28 260.74

Product: Expert 12V/24V 20A Battery Charger
Tool Reference: 05583
Bigger picture

Quantity:  






Expert 12V/24V 12A Battery Charger

(Tool Reference: 05597

Expert 12V/24V 12A Battery Charger
Expert 12V/24V 12A Battery Charger
Expert Quality, for garage and workshop use. The charger has thermal overload protection, polarity inversion and a carrying handle. Carton packed. Specification:
Charging output   ...   12/24V
Input-single phase   ...   230V AC - 13A
Charging steps   ...   2
Fast charging steps   ...   1
Charging current effective   ...   12A (RMS)
Charging current (average)   ...   9A (EN60335)
Fuse   ...   20A x 1
Dimensions   ...   200 x 190 x 270mm
Weight   ...   4.6kg
Draper Reference: 05597

132.25 158.70

Product: Expert 12V/24V 12A Battery Charger
Tool Reference: 05597
Bigger picture

Quantity:  






Expert 12/24V 300A Battery Starter/Charger

(Tool Reference: 07262

Expert 12/24V 300A Battery Starter/Charger
Expert 12/24V 300A Battery Starter/Charger
Expert Quality, for garage and workshop use. The charger has thermal overload protection, an easy-to-read ammeter, Short circuit protection, charging current regulation, polarity inversion and a carrying handle. Carton packed. 0 Specification:
Charging output   ...   12/24V
Input: single phase   ...   230V - 16A
Charging current effective   ...   50A (RMS)
Charging current (average)   ...   35A (EN60335)
Cranking current effective   ...   300A (RMS)
Cranking current (average)   ...   270A (EN60335)
Fuse   ...   30A x 1
Dimensions   ...   340 x 300 x 160mm
Weight   ...   11.8kg 0

161.82 194.18

Product: Expert 12/24V 300A Battery Starter/Charger
Tool Reference: 07262
Bigger picture

Quantity:  






Expert 12/24V 400A Battery Start/Charger with Trolley

(Tool Reference: 07263

Expert 12/24V 400A Battery Start/Charger with Trolley
Expert 12/24V 400A Battery Start/Charger
Expert Quality, fitted with trolley wheels for easy movement. Charger has fast charge facility with built in polarity protection. Suitable for lead acid, maintenance free, lead AGM and lead calcium. Carton packed. Specification:
Charging output   ...   12/24V
Input: single phase   ...   230V - 16A
Charging current effective   ...   40A (RMS)
Charging current (average)   ...   26A (EN60335)
Cranking current effective   ...   400A (RMS)
Cranking current (average)   ...   270A (EN60335)
Fuse   ...   50A x 2 + 80A x 2
Dimensions   ...   400 x 300 x 640mm
Weight   ...   18kg
Draper Reference: 07263

500.63 600.76

Product: Expert 12/24V 400A Battery Start/Charger with Trolley
Tool Reference: 07263
Bigger picture

Quantity:  






12/24V 700A Battery Starter/Charger with Trolley

(Tool Reference: 07264

12/24V 700A Battery Starter/Charger with Trolley
Expert 12/24V 700A Battery Starter/Charger
Expert Quality, fitted with trolley wheels for easy movement. Charger has fast charge facility with built in polarity protection and timer for safe battery charging. Suitable for lead acid, maintenance free, lead AGM and lead calcium. Carton packed. Specification:
Charging output   ...   12/24V
Input: single phase   ...   230V - 16A
Fast charge steps   ...   1
Charging current effective   ...   105A (RMS)
Charging current (average)   ...   70A (EN60335)
Cranking current effective   ...   700A (RMS)
Cranking current (average)   ...   460A (EN60335)
Rechargeable battery cap. range   ...   35-800Ah
Fuse   ...   100A x 2
Dimensions   ...   470 x 320 x 750mm
Weight   ...   28kg
Draper Reference: 07264

552.55 663.06

Product: 12/24V 700A Battery Starter/Charger with Trolley
Tool Reference: 07264
Bigger picture

Quantity:  






Expert 6/12/24V Battery Charger with Desulphation Facility

(Tool Reference: 07265

Expert 6/12/24V Battery Charger with Desulphation Facility
Expert 6/12/24V Battery Charger with Desulphation Facility
Draper Reference: 07265

249.00 298.80

Product: Expert 6/12/24V Battery Charger with Desulphation Facility
Tool Reference: 07265
Bigger picture

Quantity:  






Expert 6/12/24V Battery Charger with Desulphation Facility

(Tool Reference: 07266

Expert 6/12/24V Battery Charger with Desulphation Facility
Expert 6/12/24V Battery Charger with Desulphation Facility
Expert Quality, microprocessor controlled smart charger for garage and workshop use. The charger will fully maintain the battery when vehicle is not used for several months. With a built in desulphation capability allowing the detached sulphite to return to the electrolyte within the battery. Can be left permanently connected without damage to the battery. Built in polarity protection for total security. Suitable for use with lead acid, lead acid maintenance free, lead AGM, lead calcium and GEL batteries. Carton packed. Specification:
Charging output   ...   6/12/24V
Input-single phase   ...   230V - 13A
Charging steps   ...   3
Charging current   ...   22A (12V)
Charging current average   ...   15A (EN60335)
Rechargeable battery cap. range   ...   15-260Ah
Fuse   ...   30A x 1
Dimensions   ...   290 x 175 x 120mm
Weight   ...   6.35kg
Draper Reference: 07266

370.38 444.46

Product: Expert 6/12/24V Battery Charger with Desulphation Facility
Tool Reference: 07266
Bigger picture

Quantity:  






12/24V 12A Battery Charger

(Tool Reference: 11953

12/24V 12A Battery Charger
12/24V 12A Battery Charger
For workshop and home use. Suitable for conventional lead acid batteries up to 200Ah. Integral carrying handle, insulated copper leads and battery clips. Convenient front cable storage. Display carton. Specification:
Charging output   ...   12/24V
Input-single phase   ...   230V AC
Rated input   ...   300W
Charging voltage   ...   12/24V
Rated charging current   ...   11A (12V)
      ...   13A (24V)
Dimensions   ...   260 x 230 x 197mm
Weight   ...   6.4kg
Draper Reference: 11953

100.25 120.30

Product: 12/24V 12A Battery Charger
Tool Reference: 11953
Bigger picture

Quantity:  






12/24V 15A Battery Charger

(Tool Reference: 11961

12/24V 15A Battery Charger
12/24V 15A Battery Charger
For workshop and home use. Suitable for conventional lead acid batteries up to 250Ah. Integral carrying handle, insulated copper leads and battery clips. Convenient front cable storage. Display carton. Specification:
Charging output   ...   12/24V
Input-single phase   ...   230V AC
Rated input   ...   700W
Rated charging current   ...   15A (12V)
      ...   17.5A (24V)
Dimensions   ...   285 x 280 x 200mm
Weight   ...   8.5kg
Draper Reference: 11961

124.53 149.44

Product: 12/24V 15A Battery Charger
Tool Reference: 11961
Bigger picture

Quantity:  






12/24V 30A Battery Charger

(Tool Reference: 11964

12/24V 30A Battery Charger
12/24V 30A Battery Charger
For workshop and home use. Suitable for conventional lead acid batteries up to 320Ah. Integral carrying handle, insulated copper leads and battery clips. Convenient front cable storage. Display carton. Specification:
Charging output   ...   12/24V
Input-single phase   ...   230V AC
Rated input   ...   1000W
Charging voltage   ...   12/24V
Rated charging current   ...   23A (12V)
      ...   27A (24V)
Dimensions   ...   305 x 290 x 215mm
Weight   ...   9.5kg
Draper Reference: 11964

140.43 168.52

Product: 12/24V 30A Battery Charger
Tool Reference: 11964
Bigger picture

Quantity:  






12/24V 260A Battery Starter/Charger

(Tool Reference: 11966

12/24V 260A Battery Starter/Charger
12/24V 260A Battery Starter/Charger
Fitted with trolley wheels for easy movement. The starter/charger has thermal overload protection, easy-to-read ammeter, polarity inversion and transport handles. Insulated copper leads. Carton packed. Specification:
Charging output   ...   12/24V
Input: single phase   ...   230V - 16A
Charging current effective   ...   60A (RMS)
Charging current (average)   ...   40A (EN60335)
Cranking current effective   ...   260A (RMS)
Cranking current (average)   ...   160A (EN60335)
Dimensions   ...   245 x 340 x 588mm
Weight   ...   15.5kg
Draper Reference: 11966

205.25 246.30

Product: 12/24V 260A Battery Starter/Charger
Tool Reference: 11966
Bigger picture

Quantity:  






12/24V 360A Battery Starter/Charger

(Tool Reference: 11967

12/24V 360A Battery Starter/Charger
12/24V 360A Battery Starter/Charger
For garage and workshop use. With trolley wheels for easy movement around the workshop or yard. The starter/charger has thermal overload protection, battery timer, easy-to-read ammeter, polarity inversion and transport handle. Insulated copper leads. Carton packed. Specification:
Charging output   ...   12/24V
Input: single phase   ...   230V - 16A
Charging current effective   ...   75A (RMS)
Charging current (average)   ...   50A (EN60335)
Cranking current effective   ...   360A (RMS)
Cranking current (average)   ...   280A (EN60335)
Dimensions   ...   350 x 260 x 615mm
Weight   ...   23kg
Draper Reference: 11967

260.50 312.60

Product: 12/24V 360A Battery Starter/Charger
Tool Reference: 11967
Bigger picture

Quantity:  






6/12V 4.2A Battery Charger

(Tool Reference: 20486

6/12V 4.2A Battery Charger
6/12V 4.2A Battery Charger
For workshop and home use. Suitable for conventional lead acid batteries up to 45Ah. Integral carrying handle, insulated copper leads and battery clips. Display carton. Specification:
Charging output   ...   6V/12V
Input-single phase   ...   230V AC
Rated input   ...   100W
Charging voltage   ...   6V/12V
Rated charging current   ...   4.2A (6/12V)
Dimensions   ...   240 x 210 x 140mm
Weight   ...   2.5kg
Draper Reference: 20486

40.63 48.76

Product: 6/12V 4.2A Battery Charger
Tool Reference: 20486
Bigger picture

Quantity:  






6/12V 5.6A Battery Charger

(Tool Reference: 20487

6/12V 5.6A Battery Charger
6/12V 5.6A Battery Charger
For workshop and home use. Suitable for conventional lead acid batteries up to 55Ah. Integral carrying handle, insulated copper leads and battery clips. Display carton. Specification:
Charging output   ...   6/12V
Input-single phase   ...   230V AC
Rated input   ...   130W
Charging voltage   ...   6/12V
Rated charging current   ...   5.6A (6/12V)
Dimensions   ...   240 x 210 x 140mm
Weight   ...   3kg
Draper Reference: 20487

46.85 56.22

Product: 6/12V 5.6A Battery Charger
Tool Reference: 20487
Bigger picture

Quantity:  






6/12V 8.4A Battery Charger

(Tool Reference: 20492

6/12V 8.4A Battery Charger
6/12V 8.4A Battery Charger
For workshop and home use. Suitable for conventional lead acid batteries up to 85Ah. Integral carrying handle, insulated copper leads and battery clips. Display carton. Specification:
Charging output   ...   6/12V
Input-single phase   ...   230V AC
Rated input   ...   210W
Charging voltage   ...   6/12V
Rated charging current   ...   8.4A (6/12V)
Dimensions   ...   258 x 145 x 250mm
Weight   ...   4.2kg
Draper Reference: 20492

56.23 67.48

Product: 6/12V 8.4A Battery Charger
Tool Reference: 20492
Bigger picture

Quantity:  






12/24V 10.3A Battery Charger

(Tool Reference: 20493

12/24V 10.3A Battery Charger
12/24V 10.3A Battery Charger
For workshop and home use. Suitable for conventional lead acid batteries up to 50Ah (24V) or 100Ah (12V). Integral carrying handle, insulated copper leads and battery clips. Display carton. Specification:
Charging output   ...   12/24V
Input-single phase   ...   230V AC
Rated input   ...   180W
Charging voltage   ...   12/24V
Rated charging current   ...   10A (12V)
      ...   5A (24V)
Dimensions   ...   258 x 145 x 250mm
Weight   ...   5kg
Draper Reference: 20493

62.75 75.30

Product: 12/24V 10.3A Battery Charger
Tool Reference: 20493
Bigger picture

Quantity:  






12/24V 120A Battery Starter/Charger

(Tool Reference: 25354

12/24V 120A Battery Starter/Charger
12/24V 120A Battery Starter/Charger
For workshop and home use. Suitable for conventional lead acid batteries up to 400Ah. Integral carrying handle, insulated copper leads and battery clips. Convenient front cable storage. Display carton. Specification:
Charging output   ...   12/24V
Input-single phase   ...   230V AC
Charging current effective   ...   20A (RMS)
Charging current (average)   ...   16A (EN60335)
Cranking current effective   ...   120A (RMS)
Cranking current (average)   ...   70A (EN60335)
Dimensions   ...   293 x 260 x 210mm
Weight   ...   7.7kg
Draper Reference: 25354

164.18 197.02

Product: 12/24V 120A Battery Starter/Charger
Tool Reference: 25354
Bigger picture

Quantity:  






12/24V 180A Battery Starter/Charger

(Tool Reference: 25355

12/24V 180A Battery Starter/Charger
12/24V 180A Battery Starter/Charger
For workshop and home use. Suitable for conventional lead acid batteries up to 700Ah. Integral carrying handle, insulated copper leads and battery clips. Convenient front cable storage. Display carton. Specification:
Charging output   ...   12/24V
Input-single phase   ...   230V AC
Charging current effective   ...   40A (RMS)
Charging current (average)   ...   36A (EN60335)
Cranking current effective   ...   180A (RMS)
Cranking current (average)   ...   120A (EN60335)
Dimensions   ...   293 x 260 x 210mm
Weight   ...   8.75kg
Draper Reference: 25355

187.75 225.30

Product: 12/24V 180A Battery Starter/Charger
Tool Reference: 25355
Bigger picture

Quantity:  






12/24V 20A Battery Charger

(Tool Reference: 40177

12/24V 20A Battery Charger
12/24V 20A Battery Charger
For garage and workshop use. The charger has thermal overload protection, an easy-to-read ammeter, polarity inversion and a carrying handle. Carton packed. 0 Specification:
Charging output   ...   12/24V
Input-single phase   ...   230V AC
Charging steps   ...   2
Fast charge steps   ...   1
Charging current effective   ...   30A (12V)
Charging current average   ...   20A (EN60335)
Battery capacity charging capacity   ...   12V - 300Ah
Fuse   ...   30A x 1
Dimensions   ...   200 x 190 x 270mm
Weight   ...   7.5kg 0

44.79 53.75

Product: 12/24V 20A Battery Charger
Tool Reference: 40177
Bigger picture

Quantity:  






Expert 12/24V 230A Battery Starter Charger

(Tool Reference: 40179

Expert 12/24V 230A Battery Starter Charger
Expert 12/24V 230A Battery Starter Charger
Expert Quality, for garage and workshop use. The starter/charger has thermal overload protection, an easy-to-read ammeter, polarity inversion and a carrying handle. Carton packed. 0 Specification:
Charging output   ...   12/24V
Input: single phase   ...   230V - 16A
Charging current effective   ...   20A (RMS)
Charging current (average)   ...   13A (EN60335)
Cranking current effective   ...   230A (RMS)
Cranking current (average)   ...   150A (EN60335)
Power input   ...   0.5/3.0kW
Fuse   ...   80A x 1
Dimensions   ...   270 x 190 x 200mm
Weight   ...   10kg 0

114.99 137.99

Product: Expert 12/24V 230A Battery Starter Charger
Tool Reference: 40179
Bigger picture

Quantity:  






Expert 230V Battery Charger/ Starter

(Tool Reference: 40180

Expert 230V Battery Charger/ Starter
Expert 230V Battery Charger/ Starter
Expert Quality, fitted with trolley wheels for easy movement. The starter/charger has thermal overload protection, easy-to-read ammeter, polarity inversion and transport handles. Carton packed. Specification:
Charging output   ...   12/24V
Input: single phase   ...   230V - 16A
Charging current effective   ...   35A (RMS)
Charging current (average)   ...   20A (EN60335)
Cranking current effective   ...   300A (RMS)
Cranking current (average)   ...   220A (EN60335)
Power input   ...   1-5kW
Fuse   ...   1 x 50A
Dimensions   ...   400 x 300 x 640mm
Weight   ...   19kg
Draper Reference: 40180

404.08 484.90

Product: Expert 230V Battery Charger/ Starter
Tool Reference: 40180
Bigger picture

Quantity:  






Expert 12V/24V 500A Battery Starter/Charger

(Tool Reference: 40181

Expert 12V/24V 500A Battery Starter/Charger
Expert 12V/24V 500A Battery Starter/Charger
Expert Quality, fitted with trolley wheels for easy movement. The starter/charger has thermal overload protection, easy-to-read ammeter, polarity inversion and transport handles. Carton packed. Specification:
Charging output   ...   12/24V
Input: single phase   ...   230V - 16A
Charging current effective   ...   75A (RMS)
Charging current (average)   ...   50A (EN60335)
Cranking current effective   ...   500A (RMS)
Cranking current (average)   ...   330A (EN60335)
Power input   ...   1.7-7.5kW (max.)
Fuse   ...   1 x 100A
Dimensions   ...   450 x 320 x 700mm
Weight   ...   26kg
Draper Reference: 40181

631.60 757.92

Product: Expert 12V/24V 500A Battery Starter/Charger
Tool Reference: 40181
Bigger picture

Quantity:  






Expert 12/24V 22A Automatic Battery Charger

(Tool Reference: 43941

Expert 12/24V 22A Automatic Battery Charger
Expert 12/24V 22A Automatic Battery Charger
Expert Quality, for workshop use. Fully automatic for continuous adjustment of unsupervised charging. Features include LED charging status display, polarity inversion and thermal overload safety protection. Insulated copper leads and battery clips. Suitable for conventional lead acid, lead calcium, maintenance-free and gel filled batteries. Carton packed. 0 Specification:
Charging output   ...   12/24V
Input-single phase   ...   230V AC - 13A
Charging steps   ...   1
Fast charge steps   ...   1
Charging current effective   ...   22A (RMS)
Charging current (average)    ...   15A (EN60335)
Fuse   ...   30A x 1
Dimensions   ...   360 x 260 x 140mm
Weight   ...   9.5kg 0

143.88 172.66

Product: Expert 12/24V 22A Automatic Battery Charger
Tool Reference: 43941
Bigger picture

Quantity:  






Expert 12V Battery Charger with Constant Output Mode

(Tool Reference: 45373

Expert 12V Battery Charger with Constant Output Mode
Expert 12V Battery Charger with Constant Output Mode
Expert Quality, designed to help technicians with diagnostics on vehicles fitted with ECU’s. The unit provides a constant (10A) power source, maintaining the battery charge during ‘Key on, Engine off’ diagnostics such as fault code reading and ECU reprogramming. The built-in patented desulphation recovery programme enables restoring and charging sulphate batteries as low a 1V. Fitted with a host of features which include: soft start current control preventing damage to small or partially discharged batteries; reverse polarity protection; short circuit shutdown which prevents damage to the charger in the event of a short circuit or polarity inversion. All features are suitable for charging 12V batteries between 35 and 110Ah. When the charging cycle has ended, the charger enters standby mode compensating for any battery discharge while maintaining the battery in peak condition without overcharging. Carton packed. Specification:
Charging output   ...   12V
Input-single phase   ...   230V AC - 13A
Charge current   ...   15A (max.)
      ...   10A (RMS)
Absorbed power   ...   350VA
Nominal capacity   ...   35-110Ah
Dimensions   ...   250 x 180 x 190mm
Weight   ...   8kg
Draper Reference: 45373

588.28 705.94

Product: Expert 12V Battery Charger with Constant Output Mode
Tool Reference: 45373
Bigger picture

Quantity:  






12V O.8A Inverter Battery Charger

(Tool Reference: 48483

12V O.8A Inverter Battery Charger
12V O.8A Inverter Battery Charger
High output compact electronic charger for use with 12V batteries that are used on small cars, motorcycles, lawnmowers and jet-skis in all conditions for any length of time and in complete safety. It is also useful for maintaining lead acid batteries up to 35Ah on vehicles which are used infrequently; the battery can be connected to the charger and left. As long as the battery isn't faulty the inverter charger's intelligent, multi-stage charging regime will ensure that it's fully charged to its maximum capacity. The charging regime is three step fully automatic with pulse maintenance. Fully protected against short circuits and ± polarity inversion this charger is weatherproof (IP65), easy to use and wall mountable (fixings not supplied). Inverter chargers can ONLY be used with lead-acid battery types as follows: wet, MF,VRLA, AGM, GEL and lead calcium. Supplied with two sets of leads - one with eyelet terminals and the other crocodile clips. Display packed. 0 Specification:
Charging output   ...   12V
Input-single phase   ...   230V
Absorbed power   ...   14W
Charge voltage   ...   14.4V
Charging current   ...   0.8A
Charging programme   ...   1
Nominal capacity   ...   1.2-35Ah
Insulation   ...   IP65
Dimensions   ...   157 x 64 x 30mm
Weight   ...   360g 0

19.61 23.53

Product: 12V O.8A Inverter Battery Charger
Tool Reference: 48483
Bigger picture

Quantity:  






12V 3.6A Inverter Battery Charger

(Tool Reference: 48484

12V 3.6A Inverter Battery Charger
12V 3.6A Inverter Battery Charger
High output compact electronic charger for use with 12V batteries that are used on cars, caravans, motorhomes, boats in all conditions for any length of time and in complete safety. It is also useful for maintaining lead acid batteries up to 120Ah on vehicles which are used infrequently; the battery can be connected to the charger and left. As long as the battery isn't faulty the inverter charger's intelligent, multi-stage charging regime will ensure that it's fully charged to its maximum capacity. The charging regime is three step fully automatic with pulse maintenance. Three charging programmes - 0.8A/14.4V for batteries up to 35Ah; 3.6A/14.4V for batteries 35-120Ah and 3.6A/14.7V for batteries up to120Ah in cold mode. Fully protected against short circuits and ± polarity inversion this charger is weatherproof (IP65), easy to use and wall mountable (fixings not supplied). Inverter chargers can ONLY be used with lead-acid battery types as follows: wet, MF,VRLA, AGM, GEL and lead calcium. Supplied with set of crocodile clips. Display packed. 0 Specification:
Charging output   ...   12V
Input-single phase   ...   230V
Absorbed power   ...   80W
Charge voltage   ...   14.4-14.7V
Charging current   ...   3.6A
Charging programme   ...   3
Nominal capacity   ...   1.2-120Ah
Insulation   ...   IP65
Dimensions   ...   202 x 90 x 45mm
Weight   ...   550g 0

21.79 26.15

Product: 12V 3.6A Inverter Battery Charger
Tool Reference: 48484
Bigger picture

Quantity:  






12V 7A Inverter Battery Charger

(Tool Reference: 48485

12V 7A Inverter Battery Charger
12V 7A Inverter Battery Charger
High output compact electronic charger for use with any type of lead acid battery with a capacity of up to 225Ah. As long as the battery isn't faulty the inverter charger's intelligent, multi-stage charging regime will ensure that it's fully charged to its maximum capacity. The charging regime is three step fully automatic with pulse maintenance. Four charging programmes - 14.4V for batteries up to 225Ah; 14.7V for batteries up to 225Ah (cold mode); 5A/13.6V as a constant power supply/starter charging of very low charge batteries/memory saving function for disconnected batteries; 16V battery equalization for the recovery of partially sulphated batteries. Fully protected against short circuits and ± polarity inversion this charger is weatherproof (IP65), easy to use and wall mountable (fixings not supplied). Inverter chargers can ONLY be used with lead-acid battery types as follows: wet, MF, VRLA, AGM, GEL and lead calcium. Supplied with set of crocodile clips. Display packed. 0 Specification:
Charging output   ...   12V
Input-single phase   ...   230V
Absorbed power   ...   130W
Charge voltage   ...   14.4-16.0V
Charging current   ...   7A
Charging programme   ...   4
Nominal capacity   ...   14-225Ah
Insulation   ...   IP65
Dimensions   ...   202 x 90 x 45mm
Weight   ...   650g 0

27.24 32.69

Product: 12V 7A Inverter Battery Charger
Tool Reference: 48485
Bigger picture

Quantity:  






12V Automatic Battery Charger

(Tool Reference: 66800

12V Automatic Battery Charger
12V Automatic Battery Charger
For workshop and home use. Automatically reverts to safe trickle mode when battery fully charged thus maintaining a fully-charged battery. Intermittent 8A charge setting. Features include LED battery condition tester, LED charging status display, ± polarity inversion protection and thermal overload safety protection. Insulated copper leads and battery clips. Suitable for conventional and maintenance-free lead acid batteries ONLY. Display carton. 0 Specification:
Charging output   ...   12V
Input-single phase   ...   230V AC
Charging steps   ...   1
Av. charging current EN60335   ...   5.5A (intermittent)
Effective charging current (12V)   ...   8A (intermittent)
Dimensions   ...   184 x 112 x 86mm
Weight   ...   2.1kg 0

26.11 31.33

Product: 12V Automatic Battery Charger
Tool Reference: 66800
Bigger picture

Quantity:  






Draper 12V Battery Charger/Starter and Tester - 26A

(Tool Reference: 66801

Draper 12V Battery Charger/Starter and Tester - 26A
12V Battery Charger/Starter and Tester - 26A
For workshop and home use. Heavy duty 60A engine start facility. Fast 26A charge setting. Features include LED battery condition tester, LED charging status display, ± polarity inversion protection and thermal overload safety protection. Insulated copper leads and battery clips. Suitable for conventional lead acid batteries ONLY. Display carton. Specification:
Charging output   ...   12V
Input-single phase   ...   230V AC
Charging steps   ...   3 (normal, fast & start)
Av. charging current EN60335   ...   17A (fast charge)
Effective charging current (12V)   ...   26A (fast)
Start charging current   ...   60A
Dimensions   ...   250 x 150 x 150mm
Weight   ...   4.5kg
Draper Reference: 66801

60.99 73.19

Product: Draper 12V Battery Charger/Starter and Tester - 26A
Tool Reference: 66801
Bigger picture

Quantity:  






PP3 Size Heavy Duty Ni-Mh Battery

(Tool Reference: 76063

PP3 Size Heavy Duty Ni-Mh Battery
PP3 Size Heavy Duty Ni-Mh Battery

1.08 1.30

Product: PP3 Size Heavy Duty Ni-Mh Battery
Tool Reference: 76063
Bigger picture

Quantity:  






Expert 12V 135A Battery Starter/Charger

(Tool Reference: 5582

Expert 12V 135A Battery Starter/Charger
Expert 12V 135A Battery Starter/Charger
Professional Quality, manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. 24 tooth push through pattern, 200mm long, for forward/reverse action. Impact resistant hand grip. Spring-loaded ball bearing for secure socket holding. Sold loose. Manufactured to DIN 3122 Form C/ISO 3315 Specifications

201.50 241.80

Product: Expert 12V 135A Battery Starter/Charger
Tool Reference: 5582
Bigger picture

Quantity:  






Expert 12V/24V 20A Battery Charger

(Tool Reference: 5583

Expert 12V/24V 20A Battery Charger
Expert 12V/24V 20A Battery Charger
Professional Quality, manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. 24 tooth push through pattern, 200mm long, for forward/reverse action. Impact resistant hand grip. Spring-loaded ball bearing for secure socket holding. Sold loose. Manufactured to DIN 3122 Form C/ISO 3315 Specifications

217.28 260.74

Product: Expert 12V/24V 20A Battery Charger
Tool Reference: 5583
Bigger picture

Quantity:  






Expert 12V/24V 12A Battery Charger

(Tool Reference: 5597

Expert 12V/24V 12A Battery Charger
Expert 12V/24V 12A Battery Charger
Professional Quality, manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. 24 tooth push through pattern, 200mm long, for forward/reverse action. Impact resistant hand grip. Spring-loaded ball bearing for secure socket holding. Sold loose. Manufactured to DIN 3122 Form C/ISO 3315 Specifications

132.25 158.70

Product: Expert 12V/24V 12A Battery Charger
Tool Reference: 5597
Bigger picture

Quantity:  






Expert 12/24V 400A Battery Start/Charger

(Tool Reference: 7263

Expert 12/24V 400A Battery Start/Charger
Expert 12/24V 400A Battery Start/Charger
Professional Quality, manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. 24 tooth push through pattern, 200mm long, for forward/reverse action. Impact resistant hand grip. Spring-loaded ball bearing for secure socket holding. Sold loose. Manufactured to DIN 3122 Form C/ISO 3315 Specifications

500.63 600.76

Product: Expert 12/24V 400A Battery Start/Charger
Tool Reference: 7263
Bigger picture

Quantity:  






Expert 6/12/24V Battery Charger with Desulphation Facility

(Tool Reference: 7266

Expert 6/12/24V Battery Charger with Desulphation Facility
Expert 6/12/24V Battery Charger with Desulphation Facility
Professional Quality, manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. 24 tooth push through pattern, 200mm long, for forward/reverse action. Impact resistant hand grip. Spring-loaded ball bearing for secure socket holding. Sold loose. Manufactured to DIN 3122 Form C/ISO 3315 Specifications

370.38 444.46

Product: Expert 6/12/24V Battery Charger with Desulphation Facility
Tool Reference: 7266
Bigger picture

Quantity:  






12/24V 700A Battery Starter/Charger

(Tool Reference: 7264

12/24V 700A Battery Starter/Charger
12/24V 700A Battery Starter/Charger
Professional Quality, manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. 24 tooth push through pattern, 200mm long, for forward/reverse action. Impact resistant hand grip. Spring-loaded ball bearing for secure socket holding. Sold loose. Manufactured to DIN 3122 Form C/ISO 3315 Specifications

552.55 663.06

Product: 12/24V 700A Battery Starter/Charger
Tool Reference: 7264
Bigger picture

Quantity:  






Expert 6/12/24V Battery Charger with Desulphation Facility

(Tool Reference: 7265

Expert 6/12/24V Battery Charger with Desulphation Facility
Expert 6/12/24V Battery Charger with Desulphation Facility
Professional Quality, manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. 24 tooth push through pattern, 200mm long, for forward/reverse action. Impact resistant hand grip. Spring-loaded ball bearing for secure socket holding. Sold loose. Manufactured to DIN 3122 Form C/ISO 3315 Specifications

249.00 298.80

Product: Expert 6/12/24V Battery Charger with Desulphation Facility
Tool Reference: 7265
Bigger picture

Quantity:  






Expert 12/24V 300A Battery Starter/Charger

(Tool Reference: 24391

Expert 12/24V 300A Battery Starter/Charger
Expert 12/24V 300A Battery Starter/Charger
Expert Quality, for garage and workshop use. The charger has thermal overload protection, an easy-to-read ammeter, Short circuit protection, charging current regulation, polarity inversion and a carrying handle. Carton packed. Specification:
Charging output   ...   12/24V
Input: single phase   ...   230V - 16A
Charging current effective   ...   50A (RMS)
Charging current (average)   ...   35A (EN60335)
Cranking current effective   ...   300A (RMS)
Cranking current (average)   ...   270A (EN60335)
Fuse   ...   30A x 1
Dimensions   ...   340 x 300 x 160mm
Weight   ...   11.8kg
Draper Reference: 24391

338.15 405.78

Product: Expert 12/24V 300A Battery Starter/Charger
Tool Reference: 24391
Bigger picture

Quantity:  






Expert 12/24V 230A Battery Starter Charger

(Tool Reference: 24561

Expert 12/24V 230A Battery Starter Charger
Expert 12/24V 230A Battery Starter Charger
Expert Quality, for garage and workshop use. The starter/charger has thermal overload protection, an easy-to-read ammeter, polarity inversion and a carrying handle. Carton packed. Specification:
Charging output   ...   12/24V
Input: single phase   ...   230V - 16A
Charging current effective   ...   20A (RMS)
Charging current (average)   ...   13A (EN60335)
Cranking current effective   ...   230A (RMS)
Cranking current (average)   ...   150A (EN60335)
Power input   ...   0.5/3.0kW
Fuse   ...   80A x 1
Dimensions   ...   340 x 300 x 160mm
Weight   ...   10kg
Draper Reference: 24561

248.15 297.78

Product: Expert 12/24V 230A Battery Starter Charger
Tool Reference: 24561
Bigger picture

Quantity:  






6/12V Intelligent Battery Charger

(Tool Reference: 33861

6/12V Intelligent Battery Charger
6/12V Intelligent Battery Charger
For workshop and home use. Fully automatic with high frequency technology, continuous adjustment for unsupervised charging and microprocessor controlled. Maintains battery in a 100% fully charged state. Features include polarity inversion protection and thermal overload protection. Suitable for wet, AGM and gel batteries between 40Ah and 160Ah. Microprocessor controlled, supplied with insulated copper leads and battery clips. Display carton. Specification:
Charging output   ...   6/12V
Input-single phase      ...   230V AC
Output Currents@ 6V   ...   8A
Output Currents@ 12V   ...   8A
Dimensions   ...   184 x 112 x 86mm
Weight   ...   1kg
Draper Reference: 33861

72.85 87.42

Product: 6/12V Intelligent Battery Charger
Tool Reference: 33861
Bigger picture

Quantity:  






12V Battery Charger/Maintainer

(Tool Reference: 38253

12V Battery Charger/Maintainer
12V Battery Charger/Maintainer
For easy to use battery charging and maintenance. The high frequency technology charges and preserves batteries between 3 – 40AH, ensuring a vehicle's alarm for example does not drain the battery. Features overcharging and short circuit controlled protection. Microprocessor controlled. Fitted with 1M of cable with crocodile clips attached. Display packed. Specification:
Input   ...   230V AC
Output   ...   12V DC
Output current   ...   1A or 2A
Cable length   ...   1M
Draper Reference: 38253

45.25 54.30

Product: 12V Battery Charger/Maintainer
Tool Reference: 38253
Bigger picture

Quantity:  






6/12V 6A Intelligent Battery Charger

(Tool Reference: 38254

6/12V 6A Intelligent Battery Charger
6/12V 6A Intelligent Battery Charger
Intelligent battery charger that senses the batteries condition and adjusts the charging parameters accordingly. Microprocessor controlled, enters float mode when the battery is fully charged guarding against over-charging and damage. Display packed. Specification:
Charging output   ...   6/12V
Input-single phase   ...   230V AC
Charge voltage   ...   12V
Charging current   ...   6A
Nominal capacity   ...   10-300Ah
Dimensions   ...   145 x 100 x 60mm
Weight   ...   672g
Draper Reference: 38254

43.23 51.88

Product: 6/12V 6A Intelligent Battery Charger
Tool Reference: 38254
Bigger picture

Quantity:  






Solar Powered Auto-Varioshade Welding and Grinding Helmet

(Tool Reference: 38271

Solar Powered Auto-Varioshade Welding and Grinding Helmet
Solar Powered Auto-Varioshade Welding and Grinding Helmet
Automatic shading facility activated when arc is struck. Shade adjusts between DIN 9-13 with solar panel recharging of internal battery. The high impact nylon construction provides maximum protection. Switching time less than 0.0004 seconds. Convenient switch to grinding shade on side of helmet. Display carton. BS EN 379 and BS EN 175 approved
Draper Reference: 38271

85.95 103.14

Product: Solar Powered Auto-Varioshade Welding and Grinding Helmet
Tool Reference: 38271
Bigger picture

Quantity:  






Solar Powered Auto-Varioshade Welding and Grinding Helmet-Flame

(Tool Reference: 38392

Solar Powered Auto-Varioshade Welding and Grinding Helmet-Flame
Solar Powered Auto-Varioshade Welding and Grinding Helmet-Flame
Automatic shading facility activated when arc is struck. Shade adjusts between DIN 9-13 with solar panel recharging of internal battery. The high impact nylon construction provides maximum protection. Switching time less than 0.0004 seconds. Convenient switch to grinding shade on side of helmet. Display carton. BS EN 379 and BS EN 175 approved
Draper Reference: 38392

100.25 120.30

Product: Solar Powered Auto-Varioshade Welding and Grinding Helmet-Flame
Tool Reference: 38392
Bigger picture

Quantity:  






12V DC Vehicle to Vehicle Booster

(Tool Reference: 46544

12V DC Vehicle to Vehicle Booster
12V DC Vehicle to Vehicle Booster
Easy to use car-to-car battery booster. Gives low vehicle batteries the boost required to get started within minutes. No need for jump leads, just connect the booster between vehicles cigarette lighter sockets and minutes later the battery being charged will be ready for starting. Display packed. Specification:
Rated input   ...   12V DC
Rated output   ...   15V DC
Rated output current   ...   7A
Fuse rating   ...   15A
Connection leads   ...   1mm copper wire
Cable length   ...   6M (approx)
Draper Reference: 46544

42.98 51.58

Product: 12V DC Vehicle to Vehicle Booster
Tool Reference: 46544
Bigger picture

Quantity:  






Expert 12/24V 700A Battery Starter/Charger

(Tool Reference: 52030

Expert 12/24V 700A Battery Starter/Charger
Expert 12/24V 700A Battery Starter/Charger
Expert Quality, fitted with trolley wheels for easy movement. Charger has fast charge facility with built in polarity protection and timer for safe battery charging. Suitable for lead acid, maintenance free, lead AGM and lead calcium. Carton packed. Specification:
Charging output   ...   12/24V
Input: single phase   ...   230V - 16A
Fast charge steps   ...   1
Charging current effective   ...   105A (RMS)
Charging current (average)   ...   70A (EN60335)
Cranking current effective   ...   700A (RMS)
Cranking current (average)   ...   460A (EN60335)
Rechargeable battery cap. range   ...   35-800Ah
Fuse   ...   100A x 2
Dimensions   ...   470 x 320 x 750mm
Weight   ...   28kg
Draper Reference: 52030

917.78 1,101.34







15A Battery Charger (12/24V)

(Tool Reference: 53949

15A Battery Charger (12/24V)
15A Battery Charger (12/24V)
Intelligent battery charger able to assess the battery’s condition and adjust the charging parameters accordingly. The battery charger is fitted with a microprocessor, which controls the charging input and enters float mode when the battery is fully charged. This action safeguards against over-charging and damage, while also prolonging the battery’s life. A couple of features that help prolong a vehicles battery life are a desulphation facility and a constant output mode, both these features are incorporated in this intelligent battery charger. Suitable for wet, lead acid, gel, maintenance free and AGM type batteries with an AH rating of 45-500. A simple to use, easy and useful battery charger suitable for most vehicle batteries. Specification:
Rated input   ...   230V
Rated output   ...   12/24V
Rated output current   ...   15A @ 12V, 7.5A @ 24V
Continuous output      ...   13.2@180W
Nominal capacity    ... 45-500Ah
Dimensions   ...   390mm x 200mm x 85mm
Weight   ...   2kg
Draper Reference: 53949

168.53 202.24

Product: 15A Battery Charger (12/24V)
Tool Reference: 53949
Bigger picture

Quantity:  






Tools Shop >  Battery Chargers & Starters



Battery Chargers & Starters - Buy online at Chronos (call us or click LIVE CHAT for help with Battery Chargers & Starters)


Please also visit our Clarke Tools website - selling the whole of the Clarke Tools range. You can find it at www.clarketooling.co.uk. Don't forget to visit the Chronos Engineering Tools Blog and search for Battery Chargers & Starters



Draper Tools
checkout
  View Basket
Draper Tools Delivery
Free UK Delivery